Stop Chasing The Bead. Guide It.
Glue Everywhere Except An Even Line
You cut the panel carefully. Then a wandering glue bottle leaves thick blobs and thin patches along the edge. Guide this applicator along your board for a smooth, consistent bead—so glue-up looks as controlled as the work that came before it.
Long Panel? Keep Your Bead On Track
A tabletop or workbench panel gives you plenty of edge to cover—and plenty of chances to wander off it. The applicator follows the board as you slide, keeping glue application controlled. Move from edge to edge with a guide, rather than steering a bare nozzle freehand.
Set It To Your Stock
Your stock changes thickness. Your glue guide should adjust with it. Turn the knurled metal screws to fit boards from 0.39 to 1.18 inches thick, then secure the adjustment before your pass. You get a defined working range, not a fixed opening you have to work around.
Bring The Same Precision To Every Glue-Up
Sloppy glue lines aren't something you accept. The 2-piece set means you've got a tool ready when the next panel hits the bench—no hunting, no improvising.
Guide It. Don't Guess.
A squeeze bottle leaves you steering the nozzle freehand. This adjustable guide follows the board edge, helping you lay down a consistent bead with less mess.
|   | Joygrova | Unguided bottles |
|---|---|---|
| A board-guided glue line | ||
| Adjustable fit for panel edges | ||
| Knurled metal screws for adjustment | ||
| Mounts a standard water bottle | ||
| Two applicators in one set |
What Woodworkers Are Saying
Before You Start Your Glue-Up
Will it fit the boards I use?
Will it fit the boards I use?
The applicator adjusts to board thicknesses from 0.39 to 1.18 inches, approximately 10–30 mm. Measure your stock before ordering; boards outside that range are not covered by the stated fit.
What kind of bottle does it use?
What kind of bottle does it use?
The threaded mount is designed for a standard water bottle, which becomes your squeezable glue reservoir. Check that your bottle threads seat securely before starting your glue-up.
How do I apply the glue?
How do I apply the glue?
Fill a compatible bottle with wood glue, attach it to the threaded mount, and adjust the guide to your board thickness. Squeeze the bottle as you slide the applicator along the edge.
What comes in the set?
What comes in the set?
You get a 2-piece glue applicator set. Keep the second applicator available for another glue-up task or as a backup at your woodworking bench.